Domestic Roller shutters: Curved, Flat, Cyclone Bushfire Shutter Technical Information

The Domestic Flat Slat profile has been designed specifically to suit the domestic roller shutter market in Australia but is also ideal with many commercial applications, making it the best choice for Wholesale Roller Shutter supply. The slat is roll formed in our Adelaide manufacturing facility to the highest of world standards using a German-built roll-forming machine which is the most advanced of its type in the country.

The Domestic Flat Series slat is a double-walled cavity with PU foam injected during the roll-forming process. This process provides economical strength and insulation qualities while maintaining the exceptional working performance of the slat.

The flat profile is available in a wide range of colours, with profile lines on both sides offering an attractive appearance from both the interior and exterior of the application and offering a point of difference to assist with selling the product.

The Bushfire-rated roller shutter is ideal for residential or commercial use, particularly in areas prone to fire hazards, making it the ideal option for BAL 40-rated Fire Shutters. Manufactured to the highest standards with state-of-the-art equipment, the Bushfire-rated profile is available in a 40mm curved profile. The Bush Fire Rated has superior strength offering increased security and performance.

The overall profile appearance is clean and stylish with only a slight “V” groove line on the convex side. Available in several long-lasting and fade-resistant Interpon coatings or a natural anodized finish, the Bush Fire Rated Profile can also be powder coated in a colour of your choice. It is common knowledge that hot or burning embers entering the home during a bushfire is a major factor in the ignition of the building itself. These Bushfire Roller Shutters have been credited with saving homes from burning to the ground when other surrounding properties were not so fortunate. The Bushfire BAL 40 Fire Shutters have been extensively tested by the CSIRO under severe bushfire simulated conditions and proved to be able to withstand a maximum radiant heat exposure of 40kw/m2 after 60 minutes. As no ignition or flaming was observed throughout the testing the Bushfire Shutter has received a Bushfire Attack Level (BAL) of 40.

Since its inception our Cyclone Rated has consistently proven to be a high quality, robust and well-accepted profile so therein provided the perfect solid platform on which to develop the Cyclone-rated profile as an option for a Storm Shutter. The development and introduction of High-Density Foam (HDF) offer remarkable advantages where there is high wind or high risk. The HDF is injected into the slat profile under controlled conditions during the manufacturing roll-forming process.

The Cyclone Rated is available in both restrained and non-restrained options. Our HDF-filled profile combined with restrained guides has been tested successfully to meet cyclone category 3 regulations, while the HDF unrestrained provides an option with standard materials where extra strength and security are required.

The Wide Span Series profile is a double-walled cavity with PU foam injected during the roll-forming process. This profile is available for use on openings up to 50mts larger than our standard domestic profiles while maintaining the same level of strength and insulation qualities.

As an Australian Roller Shutter Manufacturer, we realise it is important to be able to offer a diverse range of products to provide a diverse range of solutions in this harsh climate. The Wide Span Series is a curved profile that uses a minimal head box size, making it an ideal substitute for garage doors or commercial door applications where room for roll-up is limited. Available in multiple colours, the Widespan Series has 2 profile lines on the convex side with a smooth finish on the concave.